Error codes from TunerPro on 3/25:
33 MAP High
34 MAP Low
42 EST Monitor
43 Knock Sensor
Since I still do not have enough confidence in my configuration of TunerPro I can cross check the codes by using a jumper wire at the diagnostic port to tell me the actual codes. If they match what TunerPro is telling me I will have more confidence in it.
austinthirdgen.org has good instructions and code definitions here:
http://www.austinthirdgen.org/index.php?pid=27#31LMFI
Checked codes with jumper as per instructions. They matched above list.
I need to research the 12.
12
33
34
42
43
Reset codes by disconnecting battery for 30 seconds
Re-checked with jumper: only 43
Re-scan w/TunerPro: only 43
See Knock sensor entry...
Checked codes with jumper as per instructions. They matched above list.
I need to research the 12.
12
33
34
42
43
Reset codes by disconnecting battery for 30 seconds
Re-checked with jumper: only 43
Re-scan w/TunerPro: only 43
See Knock sensor entry...
