Coolant Temp Sensor and Fuel Lines

After

Before

Found another disconnected sensor.  It is was the temp sensor on the front of the drivers side head with a single wire going to it.  Sensor is right arrow in 'before' pic.  This one just runs the gauge on the dash.  It would not have any effect on the drivability.  The sensor connection tab was painted and bent.  I cleaned and straightened it.  Gauge is now working.

Also noticed a disconnected clamp on the fuel lines (upper left arrow).  Further research determined it is function is to limit vibration damage to the metal fuel lines.  The bracket to hold it is missing - probably for some time.  One is on order from eBay.  For now, I wired it up with 12awg household wire.

Wiring harness was also under protected and a little too close to the exhaust manifold (lower left arrow).  I put some flex conduit over to for abrasion protection and wired it back - away from manifold - sort of visible in after pic.

4/14/15 Update:
Fuel line bracket arrived and was installed.

Fuel Line bracket installed.